Showing posts with label iMac. Show all posts
Showing posts with label iMac. Show all posts

Monday, August 10, 2020

Catastrophic Hard Drive Failure

Last night my Late 2012 27-inch iMac experienced a catastrophic hard drive failure. In the minutes leading up the event, I was stitching together some photos which resulted in my iMac running out of memory. I assume that the virtual memory system kicked in, as my computer immediately became slow to respond, and I could hear busier-than-normal hard drive whirring noises. After force-quitting the photo stitching application, my iMac regained normal responsiveness. Abandoning the thought of using my photo stitching application, I proceeded to check my Facebook stream on Safari. A few minutes later, I heard loud “scratching” noises coming from my hard drive, so I quit Safari and attempted to reboot. Unfortunately the iMac refused to reboot, shut down, or obey any other commands. I had no choice but to force a shutdown by pressing and holding the power button. I waited a minute and restarted my iMac. I heard one more loud scratching noise from the hard drive, and then the machine went silent.

Fortunately I have a portable external hard drive where I’ve installed macOS High Sierra (version 10.13).

By pressing the “option” key during startup, I was able to select my external hard drive as the boot volume and successfully launch Finder. I was immediately shown the following message:

I assumed that this was in reference to my internal hard drive. Not a good sign. At this point, I ran Disk Utility to try to repair the volume so that I could mount the internal hard drive and access its files. Here’s what I saw:

Another bad sign. Disk Utility said that my internal hard drive (ST3000DM001 Media) was “Uninitialized” and that its capacity was 4.14 GB when in reality it is a 3 TB fusion drive (note the SSD portion as indicated by “APFS Physical Store”). First Aid failed to repair either the hard drive or the SSD.

Next I launched TechTool Pro and ran a suite of diagnostics. The hardware tests passed for the most part, until it got to the Surface Scan where every single block was designated a bad block.

My original plan was to mount the volume, perform a 1-pass secure erase, and install a fresh new operating system. However, given that I cannot mount my internal hard drive, I have decided to format one of my spare external hard drives, install a fresh new operating system on it, and run the iMac from the external drive for the time being.

I realize that I could replace the internal hard drive, and while it appears to be rather affordable if you buy the parts and install it yourself, I have a fusion drive so I wasn’t sure if I should attempt the replacement on my own. I asked Google but didn’t find any articles about how to replace a fusion drive with a regular hard drive. I suspect that it is possible, but I would not be surprised if the procedure was slightly different. Also, I prefer not to purchase another Intel Mac just as Apple begins its transition to its own Silicon processors. So meanwhile, assuming nothing unexpected happens, I’ll be using a temporary external hard drive for my iMac boot volume, in hopes that this makeshift configuration will buy me enough time to get a new Silicon iMac.

Friday, February 22, 2019

Excuses Excuses


As described in my previous post, I recently bought a GoPro HERO7 Black. It records video at 4K (3840 x 2160). It's technically not my first device that is capable of capturing 4K video. My GoPro HERO3+ Black records video at 4K 15fps, but I found the 15fps frame rate to be unacceptable in most situations, so I mostly used 2.7K 30 fps and 1080p 60fps. However, my GoPro HERO7 Black records video at 4K 60fps (woo hoo) which means that I'll be recording a lot more 4K video.

Much to my dismay, Final Cut Pro X told me that my Late 2012 27-inch iMac (2.9 GHz Intel Core i5 processor) isn't quite powerful enough to edit 4K video (or larger). I proceeded to edit a 4K project anyway, and sure enough the skimming and previewing of 4K video is quite choppy and results in a significantly degraded editing experience. However, upon export, the 4K video plays smoothly in VLC Media Player, QuickTime Player, and of course YouTube.

The bottom line is that now I have an excuse to buy a new 27-inch Retina 5K iMac. ðŸ¤“

Tuesday, July 4, 2017

Kernel Panic

Since I was going to be away for the Independence Day weekend, I had shut down my 27-inch Late 2012 iMac and turned off the power strip/surge protector. This evening I turned on the power strip and then turned on my iMac only to be greeted a few seconds later with a kernel panic:



Here's a closer look:



After a successful restart, I launched the Mac OS X Console application but could not find the text of the kernel panic or any detailed logs (I assume the system was unable to generate a log since the system had never successfully booted). Anyone able to deduce any information from the information above?

I hope this is an isolated occurrence and not a sign of impending disaster for my iMac.

Wednesday, October 5, 2016

Firefox on Older Macs

I routinely perform maintenance tasks on my parents' two iMac machines. This includes installing software updates (e.g., Adobe Flash, MS Office, Firefox), updating antivirus definitions, and removing tracking cookies/spyware. One of the machines is a mid-2011 2.5 GHz Intel Core i5 iMac with 4 GB RAM, running Mac OS X version 10.7.5.  I have not updated the operating system for fear that it would significantly slow down the machine.

When performing routine maintenance over the weekend, Firefox 48.0.2 showed me the following message:


The Learn more link indicated that Firefox support has ended for Mac OS X 10.6, 10.7 and 10.8. My options for continuing to use a secure version of Firefox were either to upgrade to Mac OS X 10.9 Mavericks or later (in which case I could install the latest version of Firefox) or to switch to the Firefox Extended Support Release (ESR) channel which will be supported until January 2017.

Since I didn't want to take the plunge by installing Mac OS X 10.9 just yet, I installed the latest ESR release of Firefox, currently version 45.4.0:


For the time being, we are on the safest version of Firefox, but between now and January 2017, I will need to decide whether it will be worthwhile to upgrade to Mac OS X 10.9.  Does anyone have Mac OS X 10.9 running on a mid-2011 iMac (or older), and are routine activities like web browsing, email, and word processing reasonably responsive?

Saturday, September 24, 2016

Living Life on the Edge with macOS Sierra

With the introduction of macOS Sierra, I wondered if my wife's 24-inch Mid-2007 iMac with 4 GB RAM would have enough horsepower to support all the new features. She is currently using Mac OS X El Capitan version 10.11.6, and while the machine runs a little bit slowly, it supports all the basic functions that my wife demands of the machine: web browsing, photo management, and synchronizing with our iPhone and iPad mobile devices.

I found the macOS Sierra hardware requirements on this page. In summary, the following Mac models are supported:
  • MacBook (Late 2009 or newer)
  • MacBook Pro (Mid 2010 or newer)
  • MacBook Air (Late 2010 or newer)
  • Mac mini (Mid 2010 or newer)
  • iMac (Late 2009 or newer)
  • Mac Pro (Mid 2010 or newer)
Therefore, the 2007 iMac should not qualify for the upgrade. However, upon visiting the App Store, I was presented with the option to upgrade to macOS Sierra:


I am thinking of living life on the edge and see what will happen if I attempt to install the upgrade. What do you think--should I do it?

UPDATE: Since my original post on 9/24/2016, I had installed macOS 10.12 Sierra on a couple of other machines, and I found it to be similar in "bulkiness" and performance as compared with 10.11 El Capitan. Therefore, I decided to try upgrading to 10.12 Sierra on my old 24-inch Mid-2007 iMac. However, upon clicking "Download" from the App Store, I received the following message:


So I guess the system requirements are checked after being given the option to download. I am a proponent of not giving users the opportunity to make mistakes, but at least there was a safety net downstream of me deciding to install an operating system that was supposedly incompatible with my machine.

Monday, June 29, 2015

iMac (27-inch) 3TB Hard Drive Replacement Program

I received this email from Apple today (click for full size image):



The hyperlink in the email redirects to https://www.apple.com/support/imac-harddrive-3tb/.  From there, the following information is provided (click for full size image):


Even though I haven't had any problems with my hard drive and periodically monitor its SMART status, I guess I plan to get it replaced.  Anyone else affected by this recall, and if you had your hard drive serviced, how long did it take to get your computer back?